ADC_PD=POWERED, SYSPLL_PD=POWERED, USBPAD_PD=USB_TRANSCEIVER_POWE, IRCOUT_PD=POWERED, IRC_PD=POWERED, WDTOSC_PD=POWERED, BOD_PD=POWERED, FLASH_PD=POWERED, USBPLL_PD=POWERED, SYSOSC_PD=POWERED
Power configuration register
| IRCOUT_PD | IRC oscillator output power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| IRC_PD | IRC oscillator power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| FLASH_PD | Flash power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| BOD_PD | BOD power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| ADC_PD | ADC power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| SYSOSC_PD | Crystal oscillator power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| WDTOSC_PD | Watchdog oscillator power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| SYSPLL_PD | System PLL power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| USBPLL_PD | USB PLL power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| RESERVED | Reserved. Always write this bit as 0. |
| USBPAD_PD | USB transceiver power-down configuration 0 (USB_TRANSCEIVER_POWE): USB transceiver powered 1 (USB_TRANSCEIVER_POWE): USB transceiver powered down (suspend mode) |
| RESERVED | Reserved. This bit must be set to one in Run mode. |
| RESERVED | Reserved. |
| RESERVED | Reserved. Always write these bits as 111. |
| RESERVED | Reserved |